1.Some vehicles of historical interest may be exempt from statutory MOT testing. Which of the following statements is correct? : -

2.If you, or your assistant, are not familiar with the controls of a historic vehicle, you should:

3  When should you refuse to test a vehicle

4 When should you decline a 4x4 vehicle.

4. The term ‘insecure’ is used throughout the MOT manual to describe a defective condition. Which of the following is incorrect

Welcome to Section 0 Identification of a vehicle;

Which of the following is incorrect?
Registration plates must not:

Number plate missing or so insecure that it is likely to fall off is:

Vehicles may have the VIN displayed in more than one location, but only one VIN is required to be complete and legible:

More than one different VIN displayed is a:

Welcome to part three of your MOT Annual Assessment training. You need to score over 70% to pass this section of the training before you can proceed.

Brakes

Hydraulic parking brakes as an only means of operation are not acceptable on vehicles first used on or after 1 January 1978. However, they may be used to assist the application or release of a mechanical brake.

Brake pipe damaged or excessively corroded is

Brake pipe is at imminent risk of failure or fracture

Brakes pipes likely to become detached or damaged:

Flexible brake hose which is excessively damaged, deteriorated, chafed, twisted or stretched is a:

A brake disc or drum must be significantly worn before you should reject it. Being worn below the manufacturer’s recommended limit is not a reason in itself:

Hydraulic brake fluid level checks are confined to transparent reservoirs. Reservoir caps should not be removed. On many vehicles, you will not be able to see if the brake fluid is contaminated. You should only fail a vehicle if you can clearly see that the fluid is contaminated:

Contaminated Brake fluid is

Welcome to Quiz Section 2 Steering of the MOT Annual assessment training you must score over 70% to progress to stage 3 of 12.

Which statement is incorrect:

Vehicles with a beam axle can be checked with the wheels on the ground.

A steering linkage component with: excessive movement between components or likely to become detached is a:

Power steering fluid leaking or system malfunctioning is a:

Power steering fluid reservoir empty is:

⦁ Which of the following is incorrect:
Steering wheel free play should not be more than

Free play in the steering, measured at the rim of the steering wheel is
excessive would be a:

Free play in the steering, measured at the rim of the steering wheel is
excessive to the extent that safe steering is affected:

Welcome to Stage 3 Visibility of your MOT Annual assessment training. You will need to score over 70% to progress to section 4.

You should only fail the windscreen if the view is significantly affected. If only the driver’s view of the sky or the bonnet is affected, it should not be rejected:

You do not need to consider how the field of vision would be affected by tall or short drivers:

You can remove items such as a Sat Nav or air fresheners that obstruct the driver’s view of the road:

You must inspect bonnet catches on vehicles with a bonnet, which would obscure the driver’s view of the road if opened. The inspection is only for primary catches - those that hold the bonnet fully closed:

Secondary bonnet safety catches are part of the inspection:

A bonnet: which cannot be safely secured in the closed position is a:

Obligatory mirror or device: - slightly damaged or loose is:

Indirect vision cameras may not replace mirrors on some vehicles...

25. Which of the following statements is incorrect? Rear view mirrors and indirect vision devices can be any of the following positions:

Congratulations you have reached section 4 of your MOT Annual Assessment training. Please attempt section 4 Lamps, reflectors and electrical equipment you will need to score over 70% to progress to the next section.

Vehicles first used before what year does not need to have hazard warning devices:

Flashing frequency Indicators must flash at between:

Vehicles first used before what year does not need to have hazard warning devices:

Electrical wiring for braking or steering components extremely deteriorated

A battery leaking would be a

5. You must fail this British American lamp on dipped beam if the upper edge of the ‘hot spot’ is: View image here

Welcome to section 5 Axles, wheels, tyres and suspension of your MOT Annual Assessment training
To progress to section 6 you will need to score over 70%

An axle with an unsafe modification is a:

When checking for play in components for stub Axils you should:

When checking for play in components for stub Axils you should:

Tyres on the same axle or on twin wheels are different sizes would be:

If a tyre valve had a slight air leak and the tyre was deflating slowly would this be:

Before failing a cut, you must make sure it’s the cords that you can feel not a foreign object. If you’re not sure, then you should pass and advise:

Which section of the MOT Manual covers, exhaust noise assessment:

Exhaust system has a major leak or is insecure is a:

If you cannot get access to the fuel filler cap you should:

On inspecting a vehicle you discover the fuel pipe or hose has chafing. Is this a:

An exhaust shield missing where fitted as original equipment is a:

Welcome to section 7 (other equipment) MOT Annual Assessment training.

An anchorage likely to become detached in the event of a collision is

You should lift folded seats to inspect seat belts. However, you do not have to do this if you’d need tools to do it. If you cannot lift seats because there are heavy or fragile items on the seat, you can refuse to test the vehicle:

Seat belt webbing or flexible stalk significantly stretched or weakened would be:

An SRS malfunction indicator lamp (MIL) indicates a system malfunction you should:

ESC switch damaged or not functioning correctly:

Welcome to Section 8 Nuisance of your MOT Annual training please attempt all the questions you will need 70% to pass.
When conducting an MOT you should Rev the engine to around 2,500rpm or half the maximum engine speed if this is lower on vehicles not subject to an emissions test:

Do you need to carry out emissions check for hybrid vehicles - with electric and combustion engines:

Testing dual exhaust systems

A dual exhaust system has 2 separate pipes from the engine manifold to the tailpipes. You need to average the emissions from both tailpipes - even if the system has a balance tube between the separate pipes:

During the emission test, you must make sure:

A leak of fluids such as engine coolant, screen wash and fluid required for Selective Catalyst Reduction are reasons for failure.

Welcome to the final stage of your MTTA MOT Annual Assessment training.
Test Quality Information
Who is responsible for updating MOT tester’s details on the MOT testing Service:

When comparing a tester’s performance vs. the nation average which of the following can affect the RAG rating:

Who is responsible for the calibration records within a VTS:

An entrance or exit door emergency control inoperative: